Articles
Recording storage calculator: plan space before you record
Estimate recording file sizes from bitrate and duration, compare GB with GiB, and account for free space, filesystem limits and recording permissions.
Published by InoxTV · Published
Last updated
Recording storage calculator
This is an estimate from your inputs, not a speed test or a measurement. No inputs are sent to a server. Include audio in the average bitrate. The extra allowance is your chosen planning margin.
GB = Mbps × hours × count × 0.45 × (1 + allowance ÷ 100). GiB = GB × 1,000,000,000 ÷ 1,073,741,824.
This recording storage calculator estimates how much space a planned set of recordings could occupy. Enter an average total bitrate, duration per recording and number of recordings, then choose an extra allowance if useful. The estimate helps compare a plan with actual free space. It does not test a drive, verify permissions or promise that the source and device support recording.
Start with bitrate and duration
For decimal units, total gigabytes are average megabits per second multiplied by hours, by the number of recordings and by 0.45. That factor converts bits to bytes and seconds to hours. Include audio in the bitrate where possible. A figure describing video alone can underestimate the complete received presentation, especially when additional tracks are recorded.
A fictional two-hour recording at a constant total bitrate of 8 Mbps contains about 7.2 GB of media data. Five recordings with the same rate and duration total 36 GB before allowance. These are arithmetic examples, not measured file sizes from a named broadcaster. A variable-bitrate source or an application that changes the media during recording can produce different results.
Distinguish GB from GiB
One decimal gigabyte is one billion bytes. One gibibyte is 1,073,741,824 bytes. The same number of bytes therefore appears as a smaller number when expressed in GiB. This is a unit conversion, not evidence that part of a recording vanished. The calculator shows both values so that you can compare with software using either convention.
| Illustrative recording plan | Media volume before allowance |
|---|---|
| One hour at a constant 4 Mbps | 1.8 GB |
| Two hours at a constant 8 Mbps | 7.2 GB |
| Five two-hour recordings at a constant 8 Mbps | 36 GB |
| Three hours at a constant 20 Mbps | 27 GB |
Compare those estimates with the destination's current free space, not its advertised capacity. Existing recordings, other files, filesystem structures and device reservations use space too. If the device reports several storage locations, confirm which one the application will actually use. Space available somewhere else on the device does not necessarily help the configured destination.
Use an allowance deliberately
The percentage field adds a margin to your estimate. It can represent uncertainty in average bitrate or a deliberate planning reserve, but there is no universal percentage that covers every source and device. A ten percent example changes 36 GB to 39.6 GB; choosing that value is a planning decision rather than a measured property of the stream.
Keep separate notes for uncertainty and space you want to leave unused. An estimate with extra allowance does not physically reserve storage. Another application or later recording can consume the same space before the scheduled programme begins. Recheck available capacity near the recording time and follow the device's guidance for maintaining usable free space.
Capacity and maximum file size are different limits
A destination can have enough total free space while still imposing a smaller maximum size for an individual file. FAT32, for example, has a maximum file size just below 4 GiB. Whether an application splits recordings into files is implementation-specific; do not assume that it will automatically work around a filesystem limit.
Changing a filesystem can affect compatibility and may require formatting, which can erase existing data. Do not reformat a drive simply because a calculator predicts a large recording. First check the device and application's supported storage options, preserve important files and understand the consequences. The calculator cannot determine whether a particular external drive is suitable for your television.
Recording still needs a working source
A recording must receive usable media over its duration. Interrupted delivery, account expiry, device sleep or unavailable storage can affect the outcome independently of the predicted file size. Watching another programme at the same time may also require an additional provider session. The connection-limit explanation helps separate account capacity from disk capacity.
Verify that your source and applicable terms permit recording or time-shifting. Technical ability is not permission to copy or redistribute content. This article estimates data volume and does not establish legal rights for a particular programme. Keep recordings and account-related files private according to the rights and conditions that apply to your use.
Test a small recording before relying on a long one
Where recording is supported and permitted, make a short representative test using the intended destination. Confirm that the file exists, opens and contains the expected audio and video. Compare its size and duration with the estimate, remembering that a short sample may not capture the variation of a longer programme. A successful short test is useful evidence, not a guarantee about the next recording.
If your planned recordings have different bitrates or durations, calculate them separately and add the results. Use the streaming-data calculator when the constraint is an internet allowance rather than storage. For InoxTV's recording workflow and limitations, follow the recording feature guide; review backup handling before moving account-related data between devices.
